| |
The chute feeder can be installed on the ground or onto discharge port of ore bin.
The chute bottom plates do the reciprocating movement, the movement frequency is 20-60 times/min and the stroke is 20-200mm. Stroke can be adjusted by the eccentric wheel; the eccentric throw is half of the stroke. According to experience of some mine sites, the eccentric throw should no less than 30mm for cohesive ore.
The chute width is 2-2.5 times of maximum feeding granularity. The biggest chute feeder can supply ore with granularity less than 500mm. The most common specification is 980*1240 chute feeder, with feeding granularity between 350-0mm, which is the best partner of 400*600 jaw crusher. |
|
| |
 |
| |
| Specifications of Chute Feeder |
| |
| Specif-ication |
Discha-rging width(w*h)(mm) |
Max. feeding size(mm) |
Recipro-cating frqquency of through
(min-1) |
Feeding capacity
(t/h) |
Power(kw) |
Dimensions(l*w*h)(mm) |
Weight(kg) |
| 600*500 |
600*500 |
205 |
38.9 |
10.5-25.5 |
4 |
2750*910*855 |
1054 |
| 980*1240 |
980*1240 |
350 |
23.7 |
36-90 |
7.5 |
3560*1000*1070 |
1700 |
| 1000*1900 |
1000*1900 |
300 |
27 |
300 |
7.5 |
3900*1590*1340 |
2691 |
|
| |
Notice: Any change of Chute Feeder technical data shall not be advised additionally. |
| |
