Also known as sand roller mill; materials between roller wheel and roller table get grinded and abraded by the relative movement; at the same time, materials get mixed in the sand mixer. The anti-abrasion plate is applied to bottom plate of roller table and outer race of roller wheel in order to prolong the using life. Height of roller wheel to roller table can be self-adjusted so that when runs on rigid materials or on thick material layer, the roller table can be lifted automatically, by doing this the roller table can be protected effectively. It is the perfect material preparation equipment for burning-free brick, lime sand brick, cement brick, firebrick.
Main technical parameters of sand mixer
Type
S1110
S1116
S1120B
S1125B
Dimensions
(L*W*H)
1248*1039*1178
1788*1640*1610
2650*2036*2625
3108*2876*3240
Table diameter (mm)
1000
1600
2000
2500
Single load (kg)
110
450
900
1800
Capacity (t/h)
1.5-2.5
10
18-20
35-45
Motor power (Kw)
4
18.5
37
75
Main shaft rotation speed (rpm)
45
40
34.5
27.7
Roller wheel
Diameter (mm)
420
670
800
1000
Width (mm)
130
210
260
320
Single roller wheel pressure (N)
0-1100
0-4200
0-8000
0-12000
Discharger dimension (mm)
300*170
480*280
620*360
830*470
Water consumption (t/h)
Manual water supply
0.6
1.2
2.8
Pipe joint G1
3/4"
3/4"
5/4"
Note: only green sand is adopted in the capacity column with less than 5% of water content.
